Data Logger version now available
- 4 channels of digital data and 7 channels of analogue
data plus a tacho input!
New!
Dyno Plus Data Logger is housed in the same case as DynoStar,
with the same upgraded specification (see below).
This means you can upgrade Dyno Plus Data Logger easily to full
DynoStar GPS capability! Contact
us for upgrade details.
Complete with serial download cable and software for Win
95, 98, 2000, XP.
Data logger specification:
- Over 3 hours storage on 16MB MMC (supplied).
- X/Y acceleration logged at >100 samples per second.
- 7 channels of 10 bit analogue data - for example air/fuel
ratio, throttle position, temperature sensor, oil pressure
/ temp., knock sensor etc. All recorded at 12.5 samples
per second.
- Easily set for different signal levels. Factory preconfigured
with 1 12V range input, 3 5 Volt range inputs and 3 2.5V
range inputs.
- 2 inputs can be configured as differential input (factory
option).
- 4 channels of digital data - for example injector pulses,
speed sensors, gear sensors, lap indicator, etc. Recorded
at 100 samples per second.
All wiring by pluggable screw terminal blocks for ease of
installation and removal.
Optional wireless inputs: Replace 2 analogue inputs with
data from separate RF transmitter with a 10m range. The transmitter
is wireless keyfob sized with 2 differential inputs.
Tacho input - suitable for ignition clamps etc. Same signal
conditioning as Road Dyno.
Power, record, set level and tacho LEDs. On / off by push
button with audible confirm.
24 hour life from 2 AA cells
Complete with serial download cable, ignition clamp and cables,
and software for Win 95, 98, 2000, XP.
|
)
)